Tariff item · Chapter 72 · Section XV, Base metals and articles of base metal
HS 7214 91 90Iron and steel: other
Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling › Of rectangular (other than square) cross-section
- Customs duty
- 7.5%
- Notified, 45/2025-Customs
- GST now
- 18%
- Import policy
- Free
- With a condition
- Export policy
- Free
- Unit
- kg
- Duty in China
- 3%
- On Indian goods
Importing into India
What customs charges, what trade agreements take off, and the rules the goods must meet.
Customs duty
| Duty | Rate | Charged on |
|---|---|---|
| Basic customs duty (BCD), rate notified under 45/2025-Customs | 7.5% | Assessable value |
| Agriculture Infrastructure and Development Cess (AIDC) | Nil | Assessable value11/2021-Customs, S.No. 17 |
| Social Welfare Surcharge (SWS) | 10% of BCD, AIDC and Health Cess | BCD + AIDC |
| Integrated GST (IGST) | 18% | Assessable value + BCD + AIDC + SWS |
BCD is the rate notified under 45/2025-Customs (S.No. 214); the tariff's statutory rate is 15%.
Lower duty under trade agreements
| Agreement | Customs duty | Goods from |
|---|---|---|
| ASEAN–India FTA | 0% | Brunei, Indonesia, Cambodia, Laos, Myanmar, Malaysia, Philippines, Singapore, Thailand, Vietnam |
| Duty-free tariff preference for LDCs | 0% | Afghanistan, Bangladesh, Burkina Faso, Burundi, Benin, Democratic Republic of the Congo, Central African Republic, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Cambodia, Comoros, Laos, Liberia, Lesotho, Madagascar, Mali, Myanmar, Malawi, Mozambique, Niger, Rwanda, Sudan, Sierra Leone, Senegal, Somalia, Chad, Togo, Timor-Leste, Tanzania, Uganda, Yemen, Zambia |
| India–Australia ECTA | 0% | Australia |
| India–EFTA TEPA51/2025-Customs | 0% | Switzerland, Liechtenstein, Norway |
| India–Japan CEPA | 0% | Japan |
| India–Korea CEPA | 0% | South Korea |
| India–Malaysia CECA | 0% | Malaysia |
| India–Sri Lanka FTA | 0% | Sri Lanka |
| SAFTA | 0% | Afghanistan, Bangladesh, Bhutan, Maldives, Nepal |
| APTA | 3.75% | Bangladesh, Laos |
| India–EFTA TEPA53/2025-Customs | 4.5% | Iceland |
| SAFTA | 5% | Sri Lanka |
| India–Oman CEPA20/2026-Customs | 6% | Oman |
| India–UK CETA29/2026-Customs | 6.8% | United Kingdom |
Anti-dumping, countervailing and safeguard duty
None in force on this code as on 19 Oct 2026.
BIS certification
- Hot rolled medium and high tensile structural steel (IS 2062:2011): In force from 30 Aug 2024. Steel & Steel Products (Quality Control) Order, 2024
- Mild Steel and Medium Tensile Steel Bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild steel and medium tensile steel bars (IS 432 (Part 1):1982): In force from 30 Aug 2024. Steel & Steel Products (Quality Control) Order, 2024
- Carbon steel billets, blooms, slabs and bars for forgings. (IS 1875:1992): In force from 30 Aug 2024. Steel & Steel Products (Quality Control) Order, 2024
- Hot Rolled bars for production of bright bars and machined parts for engineering applications. (IS 7283:1992): In force from 30 Aug 2024. Steel & Steel Products (Quality Control) Order, 2024
- Structural Weather resistant steel. (IS 11587:1986): In force from 30 Aug 2024. Steel & Steel Products (Quality Control) Order, 2024
- Fire resistant Steel- Specification (IS 15103:2002): In force from 30 Aug 2024. Steel & Steel Products (Quality Control) Order, 2024
- Structural Steel for Building for Structures with improved seismic Resistance (IS 15962:2012): In force from 30 Aug 2024. Steel & Steel Products (Quality Control) Order, 2024
- Specification for Structural steel for construction of hulls of ships (IS 3039:1988): In force from 30 Aug 2024. Steel & Steel Products (Quality Control) Order, 2024
- Bright steel bars – v Specification (IS 9550): In force from 30 Aug 2024. Steel & Steel Products (Quality Control) Order, 2024
- Steel for hardening and tempering – Specification (IS 5517:1993): In force from 30 Aug 2024. Steel & Steel Products (Quality Control) Order, 2024
- Specification for Steel for valves for internal combustion engines (IS 7494:1981): In force from 30 Aug 2024. Steel & Steel Products (Quality Control) Order, 2024
- Specification for Carbon manganese steel forgings for pressure vessels (IS 12146:1987): In force from 30 Aug 2024. Steel & Steel Products (Quality Control) Order, 2024
- Steel For the Manufacture of Volute And Helical Springs (for Railway Rolling Stock) – Specification . (IS 3195:1992): In force from 30 Aug 2024. Steel & Steel Products (Quality Control) Order, 2024
- Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension. (IS 3431:1982): In force from 30 Aug 2024. Steel & Steel Products (Quality Control) Order, 2024
- Specification for Steel For Electrically welded round Link Chains. (IS 6967:1973): In force from 30 Aug 2024. Steel & Steel Products (Quality Control) Order, 2024
- Steel Billets,Bars And Sections For Boilers (IS 2100:1970): In force from 30 Aug 2024. Steel & Steel Products (Quality Control) Order, 2024
- Carbon And Carbon- Manganese Free- Cutting Steels (IS 4431:1978): In force from 30 Aug 2024. Steel & Steel Products (Quality Control) Order, 2024
- Carbon And Low Alloy Billets, Blooms, Slabs And Bars For Manufacture Of Shell BodiesAnd Proof Shots Used In Defence Services (IS 14698:1999): In force from 30 Aug 2024. Steel & Steel Products (Quality Control) Order, 2024
- Tool and die steels – Specification (IS 3748:1990): Not operative from 20 Nov 2025. Steel & Steel Products (Quality Control) Order, 2024
- Steel for the manufacture of laminated springs (railway rolling stock) Part 1 Flat Sections – Specification. (IS 3885 (Part 1):1992): Not operative from 20 Nov 2025. Steel & Steel Products (Quality Control) Order, 2024
- Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification. (IS 3885 (Part 2):1992): Not operative from 20 Nov 2025. Steel & Steel Products (Quality Control) Order, 2024
- Chrome molybdenum steel bars and rods for aircraft purposes (IS 963:1958): Not operative from 20 Nov 2025. Steel & Steel Products (Quality Control) Order, 2024
- Mild Steel Rivet Bars For Ship Building (IS 3298:1981): Not operative from 20 Nov 2025. Steel & Steel Products (Quality Control) Order, 2024
- Case Hardening Steels (IS 4432:1988): Not operative from 20 Nov 2025. Steel & Steel Products (Quality Control) Order, 2024
- Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs (IS 13352:1992): Not operative from 20 Nov 2025. Steel & Steel Products (Quality Control) Order, 2024
Clearance by other agencies
- Ministry Of Steel (MOS): a clearance or certificate before the goods arrive, under DGFT Notf. No. 33/2015-20 dated 28-09-2020.
- Bureau Of Indian Standards (BIS): a clearance or certificate before the goods arrive, under The Bureau Of Standards Act,1986,The Bureau Of Standards Rules 1987.
Documents: Registration Certificate (BIS).
"*Every steel and steel product specified in column (3) of schedule 1 shall conform to the corresponding indian standards specified in column (2) of the said schedule with effect from the dates specified in column (5) thereof. every steel and steel products specified in column (3) of schedule 1 shall be accompanied with a test certificate bearing the standard mark, issued by the BIS certified manufacturer, with each consignment. every steel and steel products specified in column (3) of schedule 1 shall bear the standard mark under a licence from the BIS in accordance with scheme¿i of Schedule-Ii to the BIS (ca) regulations, 2018. the sub-standard or defective steel and steel product, which do not conform to the specified standard, shall be disposed off as scrap in such a way so that there is no violation of the provisions of clause (b) of sub-section (1) of section 17 of the BIS act, 2016 (11 of 2016). any amendment or revision made by the BIS to any of the indian standards specified in column (2) of schedule 1 shall apply to this order with effect from the date of its publication by the said bureau. refer the steel and steel products QCO 2024 vide s.o.3716(e) DT 29-08-24*as per s.o.5134(e) DT 20-11-25 in schedule 1, enforcement of is number and is title at serial numbers 24, 37, 48, 55, 68, 69, 73, 74, 75, 76, 77, 79, 81, 82, 83, 87, 88, 90, 95, 96, 97, 98, 99, 101, 104, 105, 106, 107, 112, 113, 114, 115, 116, 117, 118, 119, 120, 123, 124, 125, 150 and 151 and the entries relating thereto shall not be operative for a period of 3 years from date of publication in the gazette*As per s.o.5134(e) DT 20-11-25 in schedule 1, enforcement of is number and is title at serial numbers 49, 50, 60, 64, 86, 92, 93, 94, 102, 128, 132, 135 and 137 and the entries relating thereto shall not be operative for a period of 1 year from date of publication in the gazette**Ensure strict compliance of CBIC instr. no. 16/2025-CUS dt.18.06.25 as modified by CBIC instr. no.23/2025-cus dt.15.07.25 wrt Ind Std of respective input material of steel & steel products intended for import as notified-mapped in QCO & requiring mandatory registration on sims portal*Import under this CTI requires complsry reg.under sims.pol.cond.no.5of ch-72 & DGFT NTFN 33/15-20 DT 28-9-20 & further clarification,responsesto para2.a.re-import of goods of steel for pkg purpose wont b covered under sims as it is not primarily meant for value addition,rather being re-imported for packaging only & para2.b.in both cases I.E.(i) if steel/steel item is exportd from dta to SEZ & then imported into dta from SEZ w/o value addition,or(ii) with value addition,there should be no requirement for sims reg.ref DGFT pol.cir.38/15-20 DT 19-1-22*refer DGFT NOTF 28/23 DT 28-8-23.requirement of advance reg.of min.15 days from eda of import consgnmnt under sims has been abolished.ref DGFT NOTF 19/15-20 DT 7-7-22*ensure compliance of mos circlr DT 20-10-23 issued videf.no.s-20011/14/2021-tech wherein it is mandatry for steel importers to apply & seek clarification on tcqco portal for each & steel consgnmnt which is imported w/obis license/certification*Ensure compliance of CBIC clarification vide f.no.401/88/2023-cus.iii DT 09-11-23 on circlr of mos DT 20-10-23*"
From Central Board of Indirect Taxes and Customs (CBIC), Compliance Information Portal.
Import policy (DGFT ITC(HS))
- Free.
- Condition: Â Hot roled medium and high tensile structural steel (excluding bars and rods of diameter or thickness ess than 6mm and structurals below 50mmX50mmX6mm) must conform to IS 2062
Notes on these rates
- The statutory rates come from a one-time snapshot of the Indian Trade Portal (CBIC's tariff of 30.06.2025). Changes the Finance Act 2026 made to the tariff from 1 May 2026 are not in it.
- BCD is the standard rate notified under 45/2025-Customs (Table I, S.No. 214), 7.5%, not the statutory 15%: an exemption notification lets customs charge the lower. (As amended by 02/2026-Customs.) (Not for seconds and defectives.)
- Table I of 45/2025-Customs also has 4 entries that cover this code for named goods or on a condition (for example S.No. 106: Nil | Nil | Nil, condition 3 3 3). They lower the duty only if the importer meets the condition, so they are not in the totals.
- IGST comes from our archived GST table, which still has the 12% and 28% slabs, so it may pre-date the GST rate changes of 22 September 2025. Check the current rate.
- AIDC, Health Cess and the SWS exemptions are read from notifications 11/2021-Customs, 08/2020-Customs and 11/2018-Customs as amended (to 16/2026-Customs), and the notifications that lower AIDC for a while. SWS is 10% of BCD, AIDC and Health Cess together (Finance Act 2018, s.110), never of anti-dumping, countervailing or safeguard duty or IGST.
- AIDC is Nil (S.No. 17 of 11/2021-Customs, which exempts all goods it does not name).
- Not included: GST compensation cess, anti-dumping, countervailing and safeguard duties, and exemptions or concessions such as end-use, EOU/SEZ or project imports.
- This does not check whether the import is allowed (DGFT import policy, licences, quality-control orders). The HS code explorer shows the import policy.
- This is an estimate, not an assessment. Confirm the duty with your customs broker or ICEGATE's duty calculator before you price a deal.
GST
IGST on imports is the GST rate. Rates changed on 22 September 2025.
- Now 18%.
- Until 21 September 2025 18%.
- Change: Unchanged.
The rules that set it now
| Notification | Goods | Rate |
|---|---|---|
| 9/2025-Integrated Tax (Rate)Schedule II, S.No. 268 | All bars and rods, of iron or non-alloy steel | 18% |
History
| Period | Rate | Notification |
|---|---|---|
| Until 21 Sep 2025 | 18% | 1/2017-Central Tax (Rate) |
| From 22 Sep 2025 | 18% | 9/2025-Integrated Tax (Rate) |
Exporting from India
Export duty
Nil under notification 27/2011-Customs, S.No. 58 (CBIC Customs Tariff as on 30.06.2025, Second Schedule (27/2011-Customs as amended up to 24/2024-Customs)). The tariff rate is 20%.
Duty drawback (All Industry Rates)
| Drawback item | Goods | Rate | Cap |
|---|---|---|---|
| 7214 | Other bars and rods of iron or non- alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot- extruded, but including those twisted after rolling | 1.5% | — |
Drawback items follow the 4-digit heading, not the 8-digit code: claim the one that describes your goods. Rates of notification 77/2023-Customs (N.T.) as amended, in force on 19 Oct 2026.
Export incentives (RoDTEP and RoSCTL)
- RoDTEP, Appendix 4R (exports from the domestic tariff area): Not listed: this item earns nothing under it.
- RoDTEP, Appendix 4RE (exports under Advance Authorisation, EOU or SEZ): Not listed: this item earns nothing under it.
Clearance by other agencies
CBIC's Compliance Information Portal lists no other agency's clearance for exports of this item.
*AS PER CIR NO.47/2017-CUS DTD 27/11/2017 FOR THE PURPOSE OF GRANT OF DRAWBACK WHEREVER EXPORT CONSIGNMENTS ARE SELECTED FOR ASSESSMENT OR EXAMINATION,THE AC/DC SHALL DETERMINE THE NEED TO DRAW SAMPLE ON MERITS OF EACH CASE.IF THE PACKING IS OF WOODEN MATERIAL, ENSURE THE VALID PHYTOSANITARY CERTIFICATE AND ISPM-15 MARKING COMPLIANCE AS PER CBEC INSTR. F.NO.450/19/2005-CUS-IV DTD 16.9.13.*
From Central Board of Indirect Taxes and Customs (CBIC), Compliance Information Portal.
Export policy (DGFT ITC(HS) Schedule 2)
- Free.
What buyers pay abroad: import duty in the US, UK, EU and Australia for 7214 91, and China's below.
China: the same goods (7214 91)
China shares the first 6 digits with India and splits them into 10-digit codes of its own: 1 in force under 7214 91. Exporters see what China charges Indian goods; importers see the rebate and licences their Chinese supplier deals with.
| China code | Goods | Duty on Indian goods | MFN | Import VAT | Export rebate | Licences |
|---|---|---|---|---|---|---|
| 7214.91.00.00 | Other bars and rods, hot-formed, of rectangular cross-section其他矩形截面的热加工条、杆 | 3%MFN rate (no APTA concession on this line) | 3% | 13% | 0% | 4x |
- India is a member of the Asia-Pacific Trade Agreement (APTA). With an APTA certificate of origin, Indian goods pay China's APTA rate where the line has one; China applies the lower of that and its provisional rate.
- The export VAT rebate is what China refunds its own exporters. When China cuts it, Chinese export prices tend to rise.
Every Chinese code in full
7214.91.00Hot-rolled, hot-drawn or hot-extruded bars and rods of non-alloy steel, of rectangular cross-section
7214.91.00.00Other bars and rods, hot-formed, of rectangular cross-section其他矩形截面的热加工条、杆
Excluding square正方形除外
- Unit
- kg
- MFN import duty
- 3%
- Provisional import duty
- None
- General import duty
- 20%
- Import VAT
- 13%
- Consumption tax
- 0%
- Export duty
- 0%
- Provisional export duty
- None
- Export VAT rebate
- 0%
- Updated by China
- 7 Sep 2026
Licences and certificates
- 4Export licence出口许可证
- xExport licence (processing trade)出口许可证(加工贸易)
Inspection and quarantine
None.
What the customs declaration must state
- 0.Brand type品牌类型
- 1.Export preferential status出口享惠情况
- 2.Shape (bars, rods)形状(条、杆)
- 3.Material (iron, non-alloy steel)材质(铁、非合金钢)
- 4.Method of working (hot-rolled, hot-drawn, hot-extruded)加工方法(热轧、热拉拔、热挤压)
- 5.Content of constituents (alloying elements, non-alloying elements)成分含量(合金元素、非合金元素的含量)
- 6.Condition (without deformation or twisting from rolling)状态(不带有轧制产生的变形或轧制后扭曲)
- 7.Specification (diameter of bars or rods)规格(条、杆的直径)
- 8.Cross-sectional shape (square, etc.)截面形状(正方形等)
- 9.GTIN
- 10.CAS
- 11.Other其他
China's agreement rates
- ASEAN
- 0%
- Chile
- 0%
- Pakistan
- 0%
- New Zealand
- 0%
- Peru
- 0%
- Costa Rica
- 0%
- Switzerland
- 0%
- Iceland
- 0%
- Australia
- 0%
- South Korea
- 0%
- Georgia
- 0%
- Mauritius
- 0%
- Maldives
- 0%
- Cambodia
- 0%
- Nicaragua
- 0%
- Ecuador
- 0%
- Serbia
- 0%
- Hong Kong
- 0%
- Macao
- 0%
RCEP rates
- Australia
- 0%
- Brunei
- 0%
- Cambodia
- 0%
- South Korea
- 0%
- Laos
- 0%
- Malaysia
- 0%
- New Zealand
- 0%
- Singapore
- 0%
- Thailand
- 0%
- Vietnam
- 0%
- Japan
- 0%
- Indonesia
- 0%
- Philippines
- 0%
- Myanmar
- 0%
CIQ codes
- 7214910000999Other bars and rods, hot-worked, of rectangular (other than square) cross-section其他矩形截面的热加工条、杆(正方形除外)
China's tariff as compiled by HS编码网 from China Customs, the State Council Tariff Commission and the State Taxation Administration. The Chinese is the original.
Nearby codes
Sources
- GSTN HSN code masterChecked 13 Oct 2026
- DGFT ITC(HS) import and export policyChecked 9 Oct 2026
- GST rate per HSN (archived GSTZen extract)Checked 29 Sep 2026
- Customs Tariff of India (First Schedule): sections, chapters, notes and statutory BCDChecked 19 Oct 2026
- GST rates on goods, before and after 22 September 2025Checked 18 Oct 2026
- BIS compulsory certification: products and Quality Control OrdersChecked 18 Oct 2026
- Anti-dumping, countervailing and safeguard duties in force (India)Checked 19 Oct 2026
- India import tariff by origin (Indian Trade Portal snapshot)Checked 29 Sep 2026
- GST schedule headings and 8-digit IGST (archived)Checked 29 Sep 2026
- HS code descriptions (archived file)Checked 29 Sep 2026
- India's effective basic customs duty (notification 45/2025-Customs, Table I)Checked 19 Oct 2026
- India's AIDC, Health Cess and Social Welfare Surcharge exemptions (11/2021, 08/2020, 11/2018-Customs)Checked 18 Oct 2026
- India's preferential tariff schedules (CBIC notifications)Checked 19 Oct 2026
- India's export duty (Second Schedule to the Customs Tariff Act and notifications 27/2011, 55/2022, 22/2024)Checked 18 Oct 2026
- India's All Industry Rates of duty drawback (notification 77/2023-Customs (N.T.))Checked 19 Oct 2026
- RoDTEP export incentive rates (DGFT Appendix 4R and 4RE)Checked 18 Oct 2026
- RoSCTL rebate for apparel and made-ups (Ministry of Textiles): periods and ratesChecked 19 Oct 2026
- CBIC Compliance Information Portal (CIP)Checked 19 Oct 2026
- China customs tariff (HS编码网)Checked 19 Oct 2026
For information, not a customs ruling. Only notifications published in the Gazette have legal force; confirm the duty with your customs broker or ICEGATE before you price a deal.